DOWNLOADS

On this page we provide the documentation to go with a T1 Lithium system.

Some of this documentation may not apply to your system, particularly if we've used equipment that you already had, or if we've installed a basic control system rather than a full T1 Lithium set-and-forget control system.

T1 Lithium customer documentation

About your T1 Lithium system

Lithium batteries like to work
Readings that you might like to keep an eye on (but you don't have to)
The VictronTM BMV battery monitor
The PlasmatronicsTM Dingo 2020N solar regulator
The T1 Lithium control box
When your battery is full
The JunsiTM logger

Caring for your system

When 100% state of charge isn't
Vibration: the bane of RV travelling
Checking for loose battery terminals
Keep objects off the battery
Iron ore dust
Cleaning solar panels

Resetting your system if the battery has been shut down due to low power

What causes your system to shut down
The reset process
The T1 Lithium control box

Preparing your system for storage

Setting up for short-term storage
Bringing your system back on line after short-term storage
Setting up for long-term storage
Bringing your system back on line after long-term storage

Correcting an out of balance cell

When will you see an out of balance cell?
What causes a cell imbalance?
The Junsi cell logger
Determining if a balance charge is needed
Identifying the correct cell to charge
When to do your cell balancing
Connecting the single cell 3.7v charger
Disconnecting the single cell 3.7v charger
How long does balance charging take?
Is there any danger of over-charging a cell when balancing?

Last update: 24 Feb 2022